sales@abtcharger.com 8615986775944
English Español

C600-FL Balance Charger for 8S Li-ion battery pack

Function introduction  BC600-FL is a new device for single-mass balanced charging and capacity detection for high-capacity powered Li-ion battery packs or Li-Fe packs. It can extend the life of the battery pack while accurately grasping the capacity of each battery in the system.

•BC600-FL has 8 separate programmable constant current /constant voltage charging modules;
•The constant current charging current of each module can be programmed in the range of 5A to 20A, setting the step current at 0.5A;
•Constant voltage charging voltage can be programmed in the range of 3.55V~4.35V, with a step voltage of 0.01V;
•Use standard constant current and constant voltage charge mode;
•Calculating the charge dismounted battery with Coulomb integral and display it on the LCD screen in real time ；
•It is suitable for 100~400Ah  4~8 cells of Li-ion \ Polymer\LiFePO4 battery packs ；
•Support for cascading, which can be used for Li-ion battery packs in the N*8 cells when used in many in series ；
•Supporting Bluetooth communication. The charging data can be view and the parameters can
• be set by mobile phone APP.
8615986775944 86755-86299563

Description

                    BC600-FL  Balance charger for 8S Li-ion/Li-Fe battery pack

Item Specification Remark
1.Input
Rating input voltage   100~240Vac  50/60Hz  
Input voltage range  90~264Vac   
Rating input current  5.0Arms Input:100V    Output:Full load
Max input power  576W(3.6V/20A*8) Input:100V    Output:Full load
2.Output
No load output voltage DC3.6V /4.2V  ±1%  
Output voltage range DC2V-4.3V  
Suit with battery type 100~400AH  4~8S Li-ion /Li-Fe   battery  
Charging current  20A ±10%  
Charging voltage  DC3.6V /4.2V ±1%  
Pre-charge 2A ±10%  
Charge-end current ≤1A±10%  
Timer -  
Max output power 640W
Ripple voltage ≤40mV Full load
LCD

Display voltage, current,capacity

Shorted   Yes  
Reversed Yes  
Efficiency ≥88% Full load @220V
3.Environment
Operate temperature  -10 ~ +40℃
Operate humidity < +90% Relative humidity
Storage temperature  -40 ~ +70℃  
Storage humidity 0 ~ +95% Relative humidity
Cooling Fan  
Vibration resistance 5MM/50HZ/600S Non-operating condition
Impact resistance 1 meter drop test 3 times Non-operating condition
4.Mechanical
Weight 4.0kg  
Size 327X235X142 Casing only
Connector Refer to order  
5.Safety 
Max. temperature rise < 40℃ on casing  
Safety approval CB/CE/FCC  
MTBF 30000H  
ESD 8.0KV  
Hi-Pot Insulation i/p to o/p: 3000V (1 min)  
MTBF 30000H  
ESD 8.0KV  
Hi-Pot Insulation i/p to o/p: 3000V (1 min)